In fact, many friends have some misunderstandings about casting mould, for example, many people misunderstand that the working process of designing and manufacturing mould is very complicated. In fact, on the contrary, for casting die, design and production should be very simple. Why do you say that? Now let's get to know the details. For casting die, it is not easy to be simple in shape design and production. Instead, it requires more professional knowledge and skills. You know, if in the process of processing, because a small error will affect the production effect. Therefore, our designers in the design, for each link are considered very fully, so as to ensure the processing effect.

So, how can we grasp this task well in the process of casting mould design? First, the appropriate amplitude parameters of the die should be determined in advance. In fact, the amplitude is a very important parameter for the material to be welded. If this parameter is not selected properly, then the later production work can not be ensured at all. In fact, the simple method is to make the welding head according to the scale size of the work, which can ensure the stability of the amplitude parameters.

Second, appropriate frequency parameters should be determined. If a reasonable vibration frequency can be ensured, the welding head can work in a resonant state, so that each part of the welding head can be regarded as a half-wavelength resonator. Moreover, since both the generator and the mechanical resonance frequency have a resonance working range, it is possible to ensure that the welding error of our casting die is very small within this suitable range.

Another problem to be considered is the vibration joint. Usually, the choice of node location is very important and belongs to a fixed position. In this way, the energy loss caused by casting die making can be appropriately reduced.